How to Make a Tattoo Gun: 10 Steps (with Pictures) - wikiHow (2024)

  • Categories
  • Personal Care and Style
  • Tattoos and Piercing

Download Article

Explore this Article

methods

1Creating the Components

2Assembling the Gun

Other Sections

Tips and Warnings

Things You'll Need

Related Articles

References

Article Summary

Author Info

Last Updated: October 16, 2024Fact Checked

Download Article

Tattoos are personal and creative forms of self-expression. What's more personal or creative than making your own tattoo gun? Note, however, that tattooing on human skin with a homemade tattoo gun and no formal training can be very dangerous; it's best to use this tattoo gun to practice tattooing on fruit or synthetic skin instead.

Method 1

Method 1 of 2:

Creating the Components

Download Article

  1. 1

    Find a motor. You'll need an electric motor or similar type rotary motor that runs on at least 12 volts; 18 volts would be ideal.

    • The motor will have a small shaft protruding from the center. Take a small four-hole button and attach it to that shaft with superglue. Be careful not to use so much glue that it seeps through the holes of the button and blocks them. They need to be open so that you can attach the needle. Set it aside to dry.
      • Instead of a button, you can use an eraser. Take the eraser from a mechanical pen and push it firmly onto the small shaft of your motor.
    • You can remove the motor from a VCR or remote control car, but the power will be considerably less; it's about 3.5 volts.
  2. 2

    Create the tube. The "tube" will guide the needle. It's easy to make one from a pencil or pen.

    • Use a mechanical pencil. An inexpensive plastic pencil will work fine, or you can choose one that's metal.[1] Depending on your preference, you can leave the pencil as-is or cut it down to about a 3" to 4" length.
    • Alternately, you can use an everyday stick pen like a Bic and remove the ink cylinder from inside. If you want a shorter tube, cut the pen to about a 3" or 4" length. File down the brass tip of the pen to get the ball out and make the hole big enough to allow passage of the needle.

    Advertisement

  3. 3

    Design a brace. The brace will support the tube when it's attached to the machine motor for the tattoo gun.[2]

    • Take a teaspoon and break off the bowl (the part you eat from). Then bend the spoon back to create an "L"-shape.
    • A second option would be to cut the bristles off of a toothbrush leaving about 4" in length. Use a lighter to heat up the plastic toothbrush handle and bend it into an "L" shape. Hold the bent handle in place until the plastic cools, and it becomes stiff.
  4. 4

    Make a needle. Cut a metal guitar string an inch or so longer than the length of your tube. It should reach from the center of the motor to the tip of the tube after assembly. Put soap and water into a pot and bring it to a boil. Drop your needle into the pot and boil it for five minutes. Rinse it in clear water and then boil it again in water only.[3]

    • You can prepare several needles in advance. If you do so, store them in a sterilized jar.
  5. Advertisement

  1. 1

    Attach the tube to the brace. Remove the eraser and any lead from your mechanical pencil. Hold the short end of the spoon (or toothbrush) brace in your hand the way you'd hold a gun and tape the pencil to it. The open "eraser" end of the pencil should line up with the bend in the spoon, and the shaft of the pencil should lay on the straight plane of the brace. The point of the pencil will extend off the edge of the brace.[4]

    • Be sure to tape the pencil to the brace very securely; it should not wobble or wiggle in any way.
  2. 2

    Attach the motor to the brace. Tape the motor to the short end of your brace. Be sure that it's straight and that the button is centered along the shaft of the brace.[5]

  3. 3

    Insert your needle. Place one end of the guitar string through the tip of the pencil and thread it through the tube. When it comes out the other end, pick up your pliers and bend the end of the guitar string into a 90-degree angle. Then bend the tip of the string again to create a second 90-degree angle You're basically creating a hook at the end of your needle. Snip off any extra wire from your hook; it doesn't need to be that long.

  4. 4

    Attach the needle to the motor. Take the hook you just created and set it into one of the holes in your button. When you spin the button, you should see the needle going in and out of the end of your pencil tube.[6] If necessary, trim down the needle.

    • If you used an eraser instead of a button, create just one 90-degree angle on the end of your guitar string and firmly press it into the eraser so that it's secure. Please note: it's important that the needle is intentionally off center. Do not line it up exactly in the middle of the eraser.
  5. 5

    Connect your power source. Use a plug-in adapter from a CD player, a phone charger or other power source that's made up of two wires. Split the wires apart and attach them to the contacts of the motor.

    • If you don't want to repeatedly unplug and re-plug your power source when you stop to clean the skin, purchase a small On/Off switch from an electronics store and attach it to your motor connection.
  6. 6

    Discard single-use items. Once you've finished your tattoo, you must throw away the needle and the tube (mechanical pencil/pen). Do not under any circumstances reuse these items. They can spread diseases such as hepatitis and HIV. Even if you plan to use the materials only on yourself, it's not worth the risk, especially when guitar string and mechanical pencils and pens are so inexpensive.

  7. Advertisement

Expert Q&A

Search

Add New Question

  • Question

    How can I make a manual tattoo applicator?

    María Fernández González
    Tattoo Artist

    María Fernández González is a Tattoo Artist based in Hamburg, Germany. She works out of her tattoo studio, Alchemist’s Valley, which has locations in both Hamburg and Madrid. She specializes in fineline tattoos with soft shadings. While she mainly works with black ink, she sometimes includes touches of color in her work as well. Her original tattoo designs often reference her love of nature and are defined by graphic and clean elements. María creates unique tattoo compositions that leave an indelible mark on her clients. As an early adopter of the concept of modern tattooing, which features designs with fine lines and unique illustrations, María has become a highly sought-after tattoo artist and is considered a true visionary in the field of modern tattooing. She graduated with a Master's in Fine Arts from the School of Art in Hamburg, and with a Degree in Fine Arts from Complutense University of Madrid, Spain.

    María Fernández González

    Tattoo Artist

    Expert Answer

    Get a hold of some basic tools like a piece of needle, a sturdy handle like a pencil or chopstick, and some threads. Then, secure the needle into the handle by tightly wrapping the thread around it and make sure that it's in place and that it won't move. Sterilize both the needle and handle to maintain cleanliness and safety. To start tattooing, pour some ink into a small container, dip the needle into the ink, then carefully poke the skin dot by dot to create your design.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 0Helpful 1

  • Question

    What size of guitar string do you use?

    How to Make a Tattoo Gun: 10 Steps (with Pictures) - wikiHow (27)

    Community Answer

    You can use the E string or the B string (the two smallest ones). Sometimes the E string is two flimsy, so the B string is better.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    Not Helpful 14Helpful 89

  • Question

    Do I just dip the tip of the needle in ink?

    How to Make a Tattoo Gun: 10 Steps (with Pictures) - wikiHow (28)

    Community Answer

    Yes. Put the ink in a small dish first so that you don't contaminate all of it.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 18Helpful 74

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

      Advertisement

      Tips

      • Make many needles so they can always be thrown away after use.

        Thanks

        Helpful0Not Helpful0

      • Make sure your needles remain sterile and never reuse needles.

        Thanks

        Helpful0Not Helpful0

      • Flame can also be used for sterilization of the needle before inserting it into the gun.

        Thanks

        Helpful0Not Helpful0

      Show More Tips

      Tips from our Readers How to Make a Tattoo Gun: 10 Steps (with Pictures) - wikiHow (29)

      The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.

      • I use bleach to clean my needles, but be sure to rinse them off thoroughly before use. The bleach will eat the ink if not rinsed well.

      Submit a Tip

      All tip submissions are carefully reviewed before being published

      Name

      Please provide your name and last initial

      Submit

      Thanks for submitting a tip for review!

      Advertisement

      Warnings

      • If you choose to use this tattoo gun on real human skin, do so at your own risk. Always follow proper sterilization procedures and watch for sign of injury or infection.

        Thanks

        Helpful13Not Helpful4

      • Ideally, you should only use this homemade tattoo gun to practice on synthetic skin. Do not practice on human skin or live animals.

        Thanks

        Helpful13Not Helpful7

      Advertisement

      Things You'll Need

      • Rotary motor
      • Mechanical pen or Bic pen
      • Teaspoon or toothbrush
      • Guitar string
      • Black electrical tape
      • Scissors
      • Pliers
      • Multi power supply
      • Tattoo ink (available online or from a tattoo shop)

      You Might Also Like

      How toStretch a PiercingHow toGet Your Ears Pierced
      A Beginner's Guide to Handling a New Ear PiercingSigns of an Over-Moisturized Tattoo and How to Fix ItHow to Tie Your Tattoo Sleeve TogetherHow toTell if a Tattoo Is InfectedHow to Tattoo Yourself at HomeHow to Do a Home Tattoo: Stick and Poke MethodWhy Is My Tattoo Scabbing with No Ink Underneath?How toRemove Temporary TattoosWhat Does a Snake Tattoo Mean?How toDeal With Tattoo PainCan a Septum Piercing Close Up? (Plus How to Prevent It)

      Advertisement

      About This Article

      wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 46 people, some anonymous, worked to edit and improve it over time. This article has been viewed 1,101,451 times.

      3 votes - 40%

      Co-authors: 46

      Updated: October 16, 2024

      Views:1,101,451

      Categories: Tattoos and Piercing

      Article SummaryX

      To make a tattoo gun, start by finding an 18-volt electric motor and gluing a button to the small shaft protruding from the center. Next, take out the hollow tube from a mechanical pencil, and break the bowl off a spoon and bend the handle into an “L” shape for a brace. Then, cut a metal guitar string to an inch longer than the tube for your needle. After that, use tape to attach the brace to the tube, then tape the motor to the brace. Finally, thread the guitar string through the tube and attach it to the motor through one of the button holes. To learn more, like how to connect your tattoo gun to a power source, keep reading!

      Did this summary help you?

      In other languages

      Portuguese

      Russian

      Spanish

      German

      French

      Dutch

      • Print
      • Send fan mail to authors

      Thanks to all authors for creating a page that has been read 1,101,451 times.

      Did this article help you?

      Advertisement

      How to Make a Tattoo Gun: 10 Steps (with Pictures) - wikiHow (2024)

      References

      Top Articles
      Latest Posts
      Recommended Articles
      Article information

      Author: Msgr. Refugio Daniel

      Last Updated:

      Views: 5678

      Rating: 4.3 / 5 (74 voted)

      Reviews: 89% of readers found this page helpful

      Author information

      Name: Msgr. Refugio Daniel

      Birthday: 1999-09-15

      Address: 8416 Beatty Center, Derekfort, VA 72092-0500

      Phone: +6838967160603

      Job: Mining Executive

      Hobby: Woodworking, Knitting, Fishing, Coffee roasting, Kayaking, Horseback riding, Kite flying

      Introduction: My name is Msgr. Refugio Daniel, I am a fine, precious, encouraging, calm, glamorous, vivacious, friendly person who loves writing and wants to share my knowledge and understanding with you.